Tag: "SFRN 5"

  • Reiser5: Data Tiering. Burst Buffers. Speedup synchronous modifications2

                  Dumping peaks of IO load to a proxy device

    Now you can add a small high-performance block device to your large logical volume composed of relatively slow commodity disks and get an impression that the whole your volume has throughput which is as high, as the one of that proxy device!

    This is based on a simple observation that in real life IO load is going by peaks, and the idea is to dump those peaks to a high-performance proxy device. Usually you have enough time between peaks to flush the proxy device, that is, to migrate the hot data from the proxy device to slow media in background mode, so that your proxy device is always ready to accept a new portion of peaks.

    Such technique, which is also known as Burst Buffers, initially appeared in the area of HPC. Despite this fact, it is also important for usual applications. In particular, it allows to speedup the ones, which perform so-called atomic updates.

                    Speedup atomic updates in user-space

    There is a whole class of applications with high requirements to data integrity. Such applications (typically data bases) want to be sure that any data modifications either complete, or they don't. And they don't appear as partially occurred. Some applications has weaker requirements: with some restrictions they accept also partially occurred modifications.

    Atomic updates in user space are performed via a sequence of 3 steps. Suppose you need to modify data of some file foo in an atomic way. For this you need to:

    1. write a new temporary file foo.tmp with modified data
    2. issue fsync(2) against foo.tmp
    3. rename foo.tmp to foo.

    At step 1 the file system populates page cache with new data. At step 2 the file system allocates disk addresses for all logical blocks of the file foo.tmp and writes that file to disk. At step 3 all blocks containing old data get released.

    Note that steps 2 and 3 become a reason of essential performance drop on slow media. The situation gets improved, when all dirty data rewritten to a dedicated high-performance proxy-disk, which exactly happens in a file system with Burst Buffers support.

               Speedup all synchronous modifications (TODO)
                   Burst Buffers and transaction manager

    Not only dirty data pages, but also dirty meta-data pages can be dumped to the proxy-device, so that step (3) above also won't contribute to the performance drop.

    Moreover, not only new logical data blocks can be dumped to the proxy disk. All dirty data pages, including ones, which already have location on the main (slow) storage can also be relocated to the proxy disk, thus, speeding up synchronous modification of files in all cases (not only in atomic updates via write-fsync-rename sequence described above).

    Indeed, let's remind that any modified page is always written to disk in a context of committing some transaction. Depending on the commit strategy (there are 2 ones relocate and overwrite), for each such modified dirty page there are only 2 possibility:

    • a) to be written right away to a new location,
    • b) to be written first to a temporary location (journal), then to be written back to permanent location.

    With Burst buffers support in the case (a) the file system writes dirty page right away to the proxy device. Then user should take care to migrate it back to the permanent storage (see section Flushing proxy devise below). In the case (b) the modified copy will be written to the proxy device (wandering logs), then at checkpoint time (playing a transaction) reiser4 transaction manager will write it to the permanent location (on commodity disks). In this case user doesn't need to worry on flushing proxy device, however, the procedure of commit takes more time, as user should also wait for checkpoint completion.

    So from the standpoint of performance write-anywhere transaction model (reiser4 mount option "txmod=wa") is more preferable then journalling model (txmod=journal), or even hybrid model (txmod=hybrid)

                 Predictable and non-predictable migration
                           Meta-data migration

    As we already mentioned, not only dirty data pages, but also dirty meta-data pages can be dumped to the proxy-device. Note, however, that not predictable meta-data migration is not possible because of chicken-eggish problem. Indeed, non-predictable migration means that nobody knows, on what device of your logical volume a stripe of data will be relocated in the future. Such migration requires to record location of data stripes. Now note, that such records is always a part of meta-data. Hence, you are now able to migrate meta-data in non-predictable way.

    However, it is perfectly possible to distribute/migrate meta-data in a predictable way (it will be supported in so-called symmetric logical volumes - currently not implemented). Classic example of predictable migration is RAID arrays (once you add, or remove a device to/from the array, all data blocks migrate in predictable way during rebalancing). If relocation is predictable, then it is not need to record locations of data stripes - it can always be calculated.

    Thus, non-predictable migration is applicable to data only.

                       Definition of data tiering.
                  Using proxy device to store hot data (TODO)

    Now we can precisely define tiering as (meta-)data relocation in accordance with some strategy (automatic, or user-defined), so that every relocated unit always gets location on another device-component of the logical volume.

    During such relocation block number B1 on device D1 gets released, first address component is changed to D2, second component is changed to 0 (which indicates not allocated block number), then the file system allocates block number B2 on device D2:

                     (D1, B1) -> (D2, 0) -> (D2, B2)

    Note that tiering is not defined for simple volumes (i.e. volumes, consisting only of one device). Blocks relocation within one device is always in a competence of a file system (to be precisely, of block allocator.

    Burst buffers is just one of strategies, in accordance with which all new logical blocks (optionally, all dirty pages) always get location on a dedicated proxy device. As we have figured out, Burst Buffers is useful for HPC applications, as well as for usual applications executing fsync(2) frequently.

    There are other data tiering strategies, which can be useful for other class of applications. All of them can be easily implemented in Reiser5.

    For example, you can use proxy device to store hot data only. With such strategy new logical blocks (which are always cold) will always go to the main storage (in contrast with Burst Buffers, where new logical blocks first get written to the proxy disk). Once in a while you need to scan your volume in order to push colder data out, and pull hotter data in the proxy disk. Reiser5 contains a common interface for this. It is possible to maintain per-file, or even per-blocks-extent temperature of data (e.g. as a generation counter), but we still don't have more or less satisfactory algorithms to determine critical temperature for pushing data in/out proxy disk.

             Getting started with proxy disk over logical volume

    Just follow the administration guide:
    https://reiser4.wiki.kernel.org/index.php/Proxy_Device_Administration

    WARNING: THE STUFF IS NOT STABLE! Don't store important data on Reiser5 logical volumes till beta-stability announcement.


    1 https://lkml.org/lkml/2018/10/23/188
    2From: Edward Shishkin <edward.shishkin@gmail.com>
    Date: Mon, May 25, 2020 at 6:08 PM
    Subject: [ANNOUNCE] Reiser5: Data Tiering. Burst Buffers. Speedup synchronous modifications
    To: ReiserFS development mailing list <reiserfs-devel@vger.kernel.org>, linux-kernel <linux-kernel@vger.kernel.org>